Deckvest 6D
Offshore Lifejacket Harness
Deckvest 6D
£247,26
£247,26 DW-LJH6D/ATW
Add to basketFully fitted offshore lifejacket harness with optional Harness Release System (HRS™)
- Best for
- Offshore en Coastal / Cruising
- Wearer
- Adult
- Inflation
- Automatic
- Harness
- With harness
Choose your options
Already own one? Find it by product code
Match the code on your product’s label:
Deckvest 6D 170N Tropic White
Product code DW-LJH6D/ATW
In stock
£247,26
- Register it to extend the warranty to 5 years
- Also sold and serviced by Spinlock dealers worldwide
- Questions before you buy?
In detail
Fully featured, lightweight, front opening lifejacket harness with automatic inflation and optional harness release system.
Features
- 170N and 275N Buoyancy
- UML Pro Sensor Elite activation system
- Optional Harness Release System (HRS)
- Improved front opening buckle with smooth body adjuster system
- Enhanced shoulder fit system for the perfect fit
- Hard-wearing coated fabrics in key areas
- Pylon™ 360° lifejacket light fitted
- Lume-On™ bladder illumination lights fitted
- New sprayhood design with large clear structured visor – stored away from neck
- Enhanced back profile for clean, unobtrusive look and fit
- Firing system on rear of bladder for improved comfort and reduced snagging when inflated
- 40mm Single Leg Strap with stowage pocket
- MOB1 AIS Compatible
- Emergency safety line cutter accessory available for non-HRS models
- Toggle fits to Chest Pack
Harness Release System
Spinlock's Deckvest VITO and Deckvest 6D both have the option of a Harness Release System (HRS), a soft loop attachment point for a safety line which can be released in an emergency to free a person from their safety line.
• Activation handle located behind soft loop, easy to locate, grab and pull
• Soft loop attachment released and open
• User separated from safety line and boat
• Easily reset to use again
• ISO12402-1 Deck Safety Harness
The Spinlock Harness Release System (HRS) is a new innovation which enables the wearer to disconnect from the safety line by releasing a lever behind the soft loop safety line attachment point of the lifejacket harness.
• Activation handle located behind soft loop, easy to locate, grab and pull
• Soft loop attachment released and open
• User separated from safety line and boat
• Easily reset to use again
• ISO12402-1 Deck Safety Harness
The Spinlock Harness Release System (HRS) is a new innovation which enables the wearer to disconnect from the safety line by releasing a lever behind the soft loop safety line attachment point of the lifejacket harness.
If required – at an additional cost, Spinlock can upgrade any Deckvest 6D to include the new Harness Release System.
Details & Specifications
UKCA and CE approved
ISO12402-3 150N Lifejacket
ISO12402-2 275N Special application lifejackets
ISO12401 Deck Harness
ISO12402-3 150N Lifejacket
ISO12402-2 275N Special application lifejackets
ISO12401 Deck Harness
Pylon Light ISO 12402-8
Sprayhood ISO 12402-8
Requires 1 x 33g CO2 cylinder
Product weight:
170N - 1240g (2lb 12oz).
Sprayhood ISO 12402-8
Requires 1 x 33g CO2 cylinder
Product weight:
170N - 1240g (2lb 12oz).
275N - 1500g (3lb 5oz).
Inflation System
UML Pro Sensor ELITE inflator
The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator late in 2018 (13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator).
This is a water sensitive activation system, that uses a compressed paper capsule which dissolves when wet, which then releases a spring to puncture the CO2 cylinder.
The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation.
The Pro Sensor ELITE has two indicators that show the status of the CO2 cylinder and firing head.
The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator late in 2018 (13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator).
This is a water sensitive activation system, that uses a compressed paper capsule which dissolves when wet, which then releases a spring to puncture the CO2 cylinder.
The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the jacket will not cause activation.
The Pro Sensor ELITE has two indicators that show the status of the CO2 cylinder and firing head.
Size Guide
170N or 275N?
170N is the recommended buoyancy for offshore sailing. Although a little bulkier and marginally heavier, a 275N lifejacket may be of benefit to certain users.
275N Benefits
• Can be of benefit to larger users
• May turn over a face-down body quicker
• May hold the user’s head higher out of water
• Supports the extra weight of tools or equipment and provides extra flotation for commercial users
275N Benefits
• Can be of benefit to larger users
• May turn over a face-down body quicker
• May hold the user’s head higher out of water
• Supports the extra weight of tools or equipment and provides extra flotation for commercial users
Through Life Support
Lifejacket warranty is extended to 5 years upon product registration*
Registering your Deckvest gives you the benefit of our unique online support, to help ensure that your lifejacket is reliably maintained.
• Prompts for winter care, storage and pre-season safety checks
• Access to latest online support and advice
• Updates on MOB prevention and advice
• Access to latest online support and advice
• Updates on MOB prevention and advice
Register here.
Manuals & documents
Videos
-
Deckvest 6D | Features and Fit
-
Deckvest 6D | Servicing Guide
-
Deckvest 6D | MOB1 Fitting
-
Ocean Signal PLB3 Fitting Guide | Deckvest VITO & 6D
Spares & accessories
Some parts only fit certain versions. Choose your options or find your product code to check what fits yours.
Change versionSpare parts
-
£11,16
-
£12,89
-
£9,87
-
£19,66
-
£33,83
-
£20,32
-
£27,85
-
£4,55
Accessories
Owner support
Servicing advice for your Deckvest 6D, and a direct line to the team that designed it.
